Technical Detailes

The tank is made of Linear Low - Density polyethylene (LLDPE) suitable for the storage of potable water, as well as for the storage of other liquids (check list of chemicals) and is made using the rotational molding method. (see relevant certification)

The material used is Ultraviolet stabilized for more protection against the sun.

The tank in white (or grey) external color, and black internal, combines the good external appearance with the obstruction of the light inside the tank, avoiding the creation of algae. Tanks in other colors are available upon request.

The tank is equipped with a screw type double layer lid to avoid insertion of dirt inside the tank and at the same time to allow for normal ventilation. In case the tank will be used in combination with a pump, or larger than 1" output, then the use of an external vent is necessary.

Property

Tensile Yield Strength

Flexural Modulus

Heat Deflection Temperature @ 0.455 MPa

Heat Deflection Temperature @ 1.82 MPa

Low Temperature Impact (-40°C)

ESCR (Environmental Stress Cracking Resistance)

Density
Unit

MPa

MPa

°C

°C

J

Hr

Kg/m³
Value

20.7

855

95

50

81.3

1000+

935
Vita Construction (Cyprus) completed its first construction project in 2009, the residential complex SmartHome® at Tseri, Nicosia (comprises 7 detached houses) using “smart” manufacturing methods and ensuring

significant energy efficiency. The second SmartHome® project, Vita Court 2 a residential block comprises 6 luxury flats at Palouriotissa, Nicosia) continue reading...